流程图一直是高举雅思小作文难度之首，所以掌握雅思写作流程图高分技巧就是一个非常必要的过程。那你知道雅思范文巧克力制作吗?下面是小编收集整理的雅思范文巧克力制作，大家一起来看看吧!
雅思范文巧克力制作篇一：
The iillustrations above show how chocolate is produced. Summarise the informaiton by selecting and reporting the main features.
The diagram shows the stages in the processof making chocolate.【所有的小作文第一句话都要用一般现在时。流程图必备三个词：process：整个过程, stage：阶段，step：步骤】
Chocolate comes from the cacao tree, which is grown in parts of South America, Africa and Indonesia.【开头不能冲上来就直接介绍cacao tree，而是通过主题词chocolate引出，否则显得太唐突】【流程图特点之一：介绍过程要使用一般现在时】【流程图特点之二：大量使用定语从句，将有关联的两句话连接。】【流程图特点之三：大量使用被动语态】The tree produces large red pods which contain white cocoa beans. Firstly,【流程图特点之四：使用一些表示顺序的连接词】when the pods are ripe,they are harvested, the beans are removed and they are fermented for several days in large wooden boxes.【三个句子的并列：“句子A，句子B and 句子C”。】During the fermenting process, the beans turn brown.【流程图特点之五：要适当地添加个别图中没有交代但能从图片中直接读出来的的一些内容，否则可能达不到字数要求。但是一定要把握尺度，千万不要加上自己的主观观点，否则会扣分】
Next, the brown beans are spread in the sun to dry. They are then put in large sacksand transported by train or lorry. After this, the beans are taken to a chocolate factory where they are roasted in an oven at temperatures of between 250 and 350 degree Celsius.
After being roasted, the beans are crushed and the outer shell is removed. This part is not needed for making chocolate. Finally, the inner part of the bean is pressed and liquid chocolate is produced.【流程图特点之六：一般不需要写总结】
雅思范文篇二：蚕丝制作
As is displayed in the first diagram, the life cycle of the silkworm can be categorized into 4 main stages. First, the life of the silkworm starts from eggs propagated by the moth, and it takes 10 days for each egg to become a silkworm larva that feeds on mulberry leaves. Silkworm larva continues to grow in 4 to 6 weeks, then wrapping itself with silk thread to construct a cocoon in the next 3 to 8 weeks. A moth can be produced from the cocoon in 16 days. The life cycle begins again from then on.
Focusing on the second diagram, it illustrates the 5 main steps of the procedure of producing silk cloth. Well generated cocoons will be selected firstly. Before the silk thread can be unwound, cocoons have to be boiled in hot water. One cocoon can produce approximately 300 to 900 metres of silk thread. The unwound thread will be dyed afterwards to be weaved into silk cloth.
Overall, the two diagrams reveal the stage of producing cocoons in the life cycle of the silkworm can be used to make silk cloth through 5 simple steps.
雅思范文篇三：水泥制作与生产
The diagram below shows the stages and equipment used in the cement-making process, and how cement is used to produce concrete for building purposes.
参考范文：
The diagrams illustrate the way in which cement is made and how it is then used in the process of making concrete. Overall, limestone and clay pass through four stages before being bagged ready for use as cement which then accounts for 15% of the four materials used to produce concrete. While the process of making cement uses a number of tools, the production of concrete requires only a concrete mixer.
In the first stage of making cement, limestone and clay are crushed together to form a powder. This powder is then combined in a mixer before passing into a rotating heater which has constant heat applied at one end of the tube. The resulting mixture is ground in order to produce cement. The final product is afterwards put into bags ready to be used.
Regarding the second diagram, concrete consists of mainly gravel, which is small stones, and this makes up 50% of the ingredients. The other materials used are sand (25%), cement (15%) and water (10%). These are all poured into a concrete mixer which continually rotates to combine the materials and ultimately produces concrete.
雅思范文篇四：砖块的制作
The process by which bricks are manufactured for the building industry can be outlined in seven consecutive steps. First the raw material, clay, which was just below the surface of soil in certain clay-rich areas has to be dug up by a digger.
Then the lumps of clay are placed on a metal grid in order to break up the big chunks of clay into much smaller areas, which fall through the metal grid onto a roller, whose motion further segregates the bits of clay. Sand and water are added to make a homogenous mixture, which is then either formed in moulds or cut into brick-shaped pieces by means of a wire cutter.
Those fresh bricks are then kept in a drying oven for at least 24 and a maximum of 48 hours, several dozens if not hundreds of bricks at a time. The dried bricks are then transferred to a so-called kiln, another type of high temperature oven. First they are kept at a moderate temperature of 200 ℃ -1300 ℃ . This process is followed by cooling down the finished bricks for 48 to 72 hours in a cooling chamber.
Once the bricks have cooled down and have become hard, they get packaged and delivered to their final destination, be it a building site or storage.
